Blowing Out Sprinkler System

Keep the sprinkler on for approximately two minutes in each zone. Stick to a blowout pressure of 60 psi from the compressor.

How To Blow Out Your Sprinkler System Winterizing Sprinkler Irrigation Youtube

You only want to blow out your sprinkler with the right amount of air volume.

Blowing out sprinkler system. This isnt a task that would be ideal for a DIY project. Watch the water sprinkling from the system. When blowing out the system to avoid excessive pressure which can damage valves or sprinkler pipe or cause physical injury due to flying debris.

Step 1 Turn the water off Turn the water supply to the sprinkler off. Once you have finished with the zone nearest you you have blown out your sprinkler system source. Blowing out sprinklers and sprinkler systems is a task that involves a lot of water things can get really wet while you are in the middle of the task.

When the water turns from mist to air its time to move onto the next zone. You can do it yourself with a one-time purchase of a 150 air compressor. Ewing Irrigations Jeffrey Knight with the help of.

If you dont use enough air volume after flushing some of the water out of the system the air will rise to the top of the water. While you can certainly use an electric air compressor to do the job there is the potential risk that your extension cord will get wet. Air volume is just as vital to blowing out your system as air pressure.

Blowing out sprinkler lines with a compressor is one of the most effective means of winterizing a sprinkler system. If your system already has frozen water in it avoid using a blowout flame or torch to thaw the pipes. These retain water on the valve diaphragm and blowing it out is a must.

Figuring out how to blow out your sprinklers on your own is never a good idea. Air pressure must not. Never allow yourself or anyone else to stand above the pipes sprinklers or any valves.

Properly winterizing your irrigation system is essential to preventing damaged pipe and back-flow devices. If you go for the sub-par ones youll only likely do more harm than. The truth is sprinkler systems have many different parts and fittings that require a very specific amount of pressure to do the job without damage.

If you approach blowing out your sprinkler system by thinking that the air compressor isnt anything dangerous or harmful because its just air youre already in a bad place. While blowing out your sprinkler system please ensure you adhere to the following safety rules to avoid accidents. To blowout sprinkler system Bend Oregon the proper equipment is neededWhile it is possible for you to secure your own sprinkler winterization Bend Oregon equipment they can get costly.

It usually costs 50 to 100 to have your sprinkler system blown out for the winter. When properly done the blow out method forces all of the water out of the sprinkler system so there is no chance of freeze damage throughout the winter months. Blowing out excess water is especially important for systems that have electric valves.

Blowing out a sprinkler system can be dangerous and all necessary safety precautions must be taken including. The blow out method involves placing a small amount of pressure behind the sprinkler system using a commercial air compressor at only 55-65 psi delivering 185 CFM. Eye protection should be worn at all times.

Sprinkler lines should be drained of as much water as possible each season as frozen water will expand and possibly break the underground plastic pipes. Do not stand over any irrigation components pipes sprinklers and valves during air blow out.

How To Blow Out Lawn Sprinkler Irrigation System Prepare For Winter Plumbing Tutorial Sprinkler System Diy Sprinkler Irrigation Irrigation System Diy