Destroy Hard Drive Platter

The best method of how to destroy hard drives with aluminum platters is to drill holes in them. Glass Ceramic Platters.

How To Destroy A Hard Drive Permanently Scientific American

When open maneuver out the round silver platter disk from inside.

Destroy hard drive platter. Platters are generally made out of glass or ceramic and will easily shatter. To destroy all the data stored on a hard drive you can download MiniTool Partition Wizard Free Edition select the hard drive and choose Wipe Disk to completely wipe the data on the hard drive. However the real deal is destroying the data.

To physically destroy a hard drive you can destroy the magnetic platter inside of the hard drive. Then take the platter and soak it in acid. If you click Continue then the wiping process will be performed and will take some time.

You dont need to learn special skills of how to destroy an old hard drive. While it is true that you can destroy the hard drive physically it is not always a safe choice. Indeed opening up the drivea task easily achieved with a screwdriver and hammer in a few minutesand using brute force on the platter is the best way to destroy it in short order.

Several Web sites suggest soaking the drive in diluted. Distorting the aluminum platter enough will make data unretrievable. The platter consists of aluminum plates with a magnetic plate.

How to Destroy An Old Hard Drive Properly. Perhaps one of the fastest and most direct methods of destroying the platter in a hard drive is to bash it with a hammer. Going back to the anatomy of a hard drive section if you remember there are a lot of parts that do a lot of things but at the center of it all is the platters.

Then take the platter and sand it down with a dremel or sand paper. A sledgehammer would be enough for this task but if you want you can use other objects too. The final option is to physically destroy the hard drive yourself.

No matter how thorough a data-wiping program is the only way to be certai. Others are made from metal and a good hammering will make them. This is where the data is stored.

Couldnt wipe these drives so decided to physically destroy the platters. Destroying the platters Hard drives work by using magnetized platters. Platters are generally made out of glass or ceramic and will easily shatter.

When everything is OK click the Erase button you will be asked to confirm the wiping operation. The easiest way to destroy these would be to simply open the hard drive casing often doable with nearby screwdrivers and pour something like sand into the case. Perhaps one of the fastest and most direct methods of destroying the platter in a hard drive is to bash it with a hammer.

You can also crush it to destroy the data on it. Next take the platter s out of the hard drive along with the small circuit board. How to destroy a hard drive.

Almost anything that can cause damage to the platters aluminum plates lined with a magnetic film can physically destroy a hard drive. They shatter under light pressure. With your hard drive removed from the computer and your eye protection on repeatedly strike the hard drive on various sides until it starts to open.

How to destroy a hard drive the thorough way If you are going to take the time to get your Torx driver and remove the circuit board you might as well be thorough since it only takes another five. Smash any solid state chip on the circuit board with a hammer. Destroying a hard drive is easy.

Ding dent and scratch this platter. Drilling holes produces heat which can cause permanent damage. How to Destroy a Hard Drive - Attack the platter to render a hard-disk unreadable.

Others are made from metal and a good hammering will make them. Microwaves are handy for destroying CDs and DVDs but youd have to cook a hard drive for a long long time to blister the drives platters. If you do not intend to use that drive again then the best way is to destroy it physically.

What Is The Best Way To Destroy A Hard Drive Vs Security